rivestimenti murali

TR-INTERIOR

Water-based wall covering for interiors, characterized by an exceptional filling power which, thanks to the thermal insulating properties, reduces the dispersion of heat through the walls. The product, similar to normal breathable water-based paints in aesthetic appearance, improves the thermal insulation of the walls, thus avoiding the formation of condensation caused by the temperature difference between the air and the wall.

The high resistance to mold formation is certified by test report no.15LA01492.

TR INTERIOR is an athermic water-based paint based on a vinylversatic binder and hollow glass microspheres.

  • 35% ENERGY SAVINGS FROM HEATING

    Natural climatic thermoregulator of its temperature and humidity

  • SUPPORTS

    Smoothing, walls, plasterboard, wood, metals, fabric

  • APPLICATION

    Vertical

  • SETTINGS

    Internal

  • YIELD

    100 sqm / 12,5 liter drum

  • WATER BASED

  • SOLVENT FREE

  • ENERGY SAVING

  • EXCELLENT PERFORMANCE

rivestimenti murali

Specifications

CLASSIFICATION Test report no. 15LA01494 issued by INNOVHUB experimental stations for industry in Milan

  • DETERMINATION OF THE ALGICIDE POWER UNI EN 15458: 2014
  • No algal development

VOC CLASSIFICATION (Directive 2004/42 / EC) Law Decree n. 161/2006 Law Decree n. 161/2006

  • Matt paint for interior walls and ceilings ACQUA a / BA base
  • EU limit value for this product since 2010: 30 g / l
  • TR-INTERIOR contains maximum VOC <5 g / l

PREPARATION OF THE SUBSTRATES

NEW UNPAINTED SURFACES and PLASTERBOARD
Make sure that the plasters are mature and dry, clean, free of dust and poorly coherent parts. If necessary, fill with a good quality product and sand down any imperfections.

SURFACES IN GOOD CONDITION PAINTED WITH WASHABLE WATER-BASED PAINT
Make sure the surfaces are clean, free of dust and poorly consistent parts. Sand down any imperfections. In the presence of mold, treat the surface with a suitable product. Remove any efflorescence present by brushing.

DETERIORATED OR TEMPERED PAINTED SURFACES
Thoroughly clean the surfaces, eliminating the parts of plaster or water-based paint that are flaky and poorly adherent. In the presence of mold, treat the surface with a suitable product. Remove any efflorescence present by brushing.

APPLICATION PROCEDURE

After preparing the substrate and its complete drying, proceed with the application of three coats of TR-INTERIOR with an interval of about 6 - 8 hours between each other.

COLORS

The coloring is achievable through the tintometric system.
In the case of coloring of several packs of the same color it is advisable to use bases from the same production batch.
In case this is not possible to mix the various productions together in order to avoid any differences in tone;

USEFUL TIPS / WARNINGS

Dilute the product in the percentages indicated to facilitate application and distension. Mix well before use.

SAFETY INSTRUCTIONS

Sufficiently ventilate the room after painting before staying there again.
Dispose of empty containers according to local regulations.
For further information consult the relative safety data sheet.

NOTES

The information contained in this sheet is only the result of the knowledge available at the date of the same by the manufacturer.
No responsibility is assumed for damage to persons or property resulting from improper use of this information.
The manufacturer reserves the right to change the data without notice.

Subscribe to the newsletter