• WATER-based fixative primer h / BA
• EU limit value for this product since 2010: 30 g / l
• PRIMER FX contains maximum VOCs of 20 g / l

Remove any flaking parts and restore the surface with specific mortars or smoothers. Fill any holes or capillaries in the wall with good quality filler and let it dry.

Brush and sand the wall.

Apply a coat of PRIMO FX ​​diluted with water in a ratio of 1: 3 with a variable consumption according to the conditions and absorption of the surface to be treated.

Dilute the product in the percentages indicated according to the conditions of the substrate. Mix well before use.

Do not apply with ambient and / or substrate temperatures below + 8 ° C or above + 35 ° C. Do not apply with relative humidity of the environment higher than 80%.

Store the product without dilution water in a sealed container placed in a cool, dry place away from heat sources.

Ventilatethe room sufficiently after painting before staying there again. Dispose of empty containers

For further information consult the relative safety data sheet.

The information contained in this technical data sheet is provided to the best of the manufacturer's scientific and technical knowledge. However, they do not constitute a guarantee of results as the conditions and methods of application are beyond any control. It is advisable to always evaluate the actual suitability of the product for each specific case and to comply with the usage requirements indicated in the technical data sheet.